Hey tech enthusiasts, It’s hard to believe I’m already in my third year at Logitech, working as a Solutions Engineer in the B2B sector here in Switzerland. One of the perks of my role is having a state-of-the-art lab right at home. Yes, you read … Continue reading2024 Logi-Lab rebuild
Recently, I transitioned from my older AMD-Ryzen server to a more modern Intel NUC-based setup. While this migration allowed most services to move into a Dockerized environment, I’ve found that the current setup could use some enhancements. Here are a few limitations I encountered with … Continue readingIntroducing the New Server: Miniforums MS-01
After almost a year, see my last post that I get a new server from April 2023, of planing, waiting, and finally doing, the new server is now up and running, and more important the old one is turned off! Last April I bought a … Continue readingFinally, the new server is up and running
I have been using my 100-400mm lens since almost a year. I have used the 70-200mm f4 and the 200-500mm f 5.6 in the past with the D850. But since I’ve switched to the Nikon Z8, I have been using the 100-400mm lens instead. … Continue readingThe Nikon Nikkor Z 100-400mm f/4.5-5.6 VR S
I’ve tried to use ChatGPT to write the introduction, but I could not get a good start.. so, I do it the old way. After using my Stream Deck setup for more than a year, I thought I need to clean up my layouts … Continue readingStream Deck setup update for my Lab
As many of you know, I have had my Nikon D850 since the beginnig of it’s existence. I did pre-order the D850, and never regreted it. Despite needing to replace the body due to some electronics failure.. It was a true workhorse, I don’t know … Continue readingThe Nikon Z8
For some time I was thinking about a new server setup. The current setup was updated about four years ago. It still runs stable but the disks are aging. I had to replace one or two so far. Also the power consumption of the setup … Continue readingIt’s time for a new Server
I made myself and my family a surprise present. I did not tell them that I was ordering. It was something I had my eyes on from some time, but never had the guts to really order it. I hoped it would actually arrive prior … Continue readingThis years xmas present
I have some PoE connected devices in my Lab, which I like to shut down when I don’t use them. For exapmle the Cisco-SX10 camera, some Cisco Touch-10 or the latest addition the Logitech TAP-IP. All run on PoE, but are not so simple to … Continue readingControling my Cisco-SG300 Switch with the StreamDeck & Paspi
If you have seen my last post I’m building up my Logitech Video lab here in my home. One thing what really bugged me was that I had to turn on/off my devices by hand. So I wanted something which I would be able to … Continue readingShelly: remote Wifi switches